EN
- Faahfaahin
- Bixiyo Oo La Sameeyo
Soo celinta Ubulood
Raadinta otomaatik, tokoorada keyga mid ah ku jira
Standard AEC ku xusnaa nidaamka otomaatiga ah wuxuu hagaajiya in lagu xuso
Detector-heerka sare leh luuqada labaane waa fiican siyaaradda.
Luuqadaha nooc-saaraha modular waxay hagaajiya suurtogalnimada.
Isticmaalka dhulka ka dib marka la dhex baxo. Haddii jiro khalad, koodhka khaladka waxaa muujin doona waqtiga sax.
Koonkararka kontrollka leh touch PAD waxay ugu yeelan kartaa hababka xuska heerka inta la isticmaalayo.
Nidaamka xuska heerka otomaatiga ah, ma needin inaad doorato shirqeexa xuska heerka, wuxuu hagaajiya shaacida.
DAB
- Ekran weyn oo karaama sare leh iyo dhisidda xubnaha in la wada hadlo waxay cusubtaan shaqada fudud.
- Xaqiiqsanaanta, daabac daabaciyaha joojinta ku jira bartamaha si aad ugu joojiso motoharka mar dambe.
- Waa inaad ku cadhaato bilowga si aad ugu guulo ama joojiso meesha la wareejiyey 4-ta teeb ah, intaasna marqaddi ay ka caawiyaan inay ka fiicifiiqaan dhinaca ku dhow.
- Teknoolojiga dambe leh ee in la soo dirirayo iyo in la saariyo sawtiga, iyo motoharka lagu soo deeqay ay sii kala badan tahay sawtiga.
- Dhisidda la shuruudayo, raadinta xuska ah, gooni mahad keyd ah, nolosha qalbi ah
- Meesha la xubno lahaynta waxaa loo sameeyey alaabka karbonka saydalka ah oo leh warqaha gaar ah. Kala duwanaanshaha waa yar yar.
Sharciyada tekniska | |
Xaqiiq Dhintay |
50kW |
Koronto |
220VAC |
Sawrada abshirka |
50Hz/60Hz |
Ji'da kaydinta |
≤0.5Ω |
Jiritaanka la galiyey waqtiga |
≥100KVA |
| Joogga xagga sanaafarta saaxijsan | 2200mm±5% | |
| Furitaanka xarija saaxijsan ee farshaxanka saaxijsan | ||
| 1400mm ±5% | ||
| Furitaanka dhererka hoose | 930mm±5% | |
| Furitaanka le'ega hoose | 240mm ±5% | |
| Furitaanka xarija saaxijsan ee bucky | 510mm±5% | |
| Qaata beddu ee ku xidhiidha in la guurto | 200KG | |
| Caynaha beddu (dherer, X, lebar, X, joog) | 2300mmX 800mm X 650mm | |
| Gadhaadho ceerka leh, gadhaadho siyaasadda leh, ka saaritaanka siyaasadda leh | ||
| Habka gadhaadhka beddu | ||
| Xanaano | Roorinta beddu | Roorinta hoos u dhacday oo la furayo |
| Fagaaraha kor u qaadida amarada buumka | 1400mm ±5% | |
| qeybaha | Qaabka ilaa kagac | 1500mm ±5% |
| Kala duwanaanshaha geesha tube-ka | 0° ±2° 〜±180° ±2° | |
| Kala duwanaanshaha geesha roof-ka | 180° ±2° | |
| Jiritaanka voltaajka hoos celinta | 220VAC，50Hz/60Hz | |
| Jiritaanka la ah ee si toos ah la bixiyey ugu sarreeya | 50 kW (500mA, 100kV, 0. 1s) | |
| Tibaabidda jiritaanka ka badan | 60A | |
| Sidaalaha isku dushood | 400kHz | |
| Awood sare | 40kV-150kV, xeerka buutanka diijitaalka, habkani wuxuu yahay lkV. | |
| Dhaqdhaqaaqa /kV | ||
| saabka dhaqdhaqaa | 10mA -630mA waxaa la kulma si loo qoray GB9706.3 | |
| Qiimaha noocda RT0, xeerka fidaalka diijitaalka; | ||
| Sare /mA | ||
| 0. 001s~10s waxaa la kulma GB9706.3 | ||
| Qiimaha noocda R' 10, xeerka fidaalka diijitaalka; | ||
| wakhtiga iyo ku |
| Xagal gaar ah | 0.6/1.2mm | |
| Hoodka Galmada | 400kHU | |
| Hoodidka cawanka khati dhulka | 950kJ | |
| Konaan lahaa Target | 12.0° | |
| Filtration dheer | 1.0mm Al | |
| Filtration ku daray | 1.5mm Al (3X0.5 mm AL) | |
| Miisaanka | Kama ama 17kg | |
| Qalabka waa qaylo aluminom, | ||
| tangential, xidhmo anode cir-cir oo la soo biyiyey, xidhmo tube X-ray oo cir-cir. | ||
| Qaab dhismeedka | ||
| Sababta hoos u bixinta raadiyasyonka | 150kV 3.4 mA | |
| Tolosha iskele | >2MQ | |
| Xagga fokus iyo dhaqanka kala duwanaanshada | ± 1.4mm | |
| Gundhiga raadiyasyonka X-ray | At SID, 354 * 354mm at Im | |
| Xuquuda kor u qaadashada tube-ka X-ray | Single-phase, three-phase full-wave rectification ama DC power supply | |
| Xoogga biyaha (neutral ground) | ||
| sareenka filament | 5.3 A | |
| Focus weyn: 13.5+IV, focus yar: 8.5 + 1V | ||
| voltejiga filament | ||
| Xoogga anode-ka loo bixiyey si sax ah (0. 1s), (50Hz) | Focus weyn: 50KW, focus yar: 20KW | |
| Xiriirka anooda | 2800 rpm | |
| 1) Dhexeereka hoos u leh: 120- -220V; 2) | ||
| Dhexeereka maamulka: 4060V; 3) | ||
| Qodobka subphase: 40 UF / 630V; 4) Waqtiga bilaawga: 1 ~ 1.2s | ||
| Tibixaha stator (50Hz) | ||
| Habka hoolinta jirka | Halkaas wax ku dhaadhiska ama halkaas ku dhaadhiska habdhaafka | |
| Kooban celcelintu ee tibixaha marka loo isticmaalayo si sax ah | 16 〜70°C | |
| Kooban celcelinta teedaha teedaha la socda si joogto ah | Lama yar: 200W (16 kHU / min); haa | |
| Mafan: 380W (32 kHU / min) | ||
| Filtration dheer | 1.5 mm Al (wax weyn) | |
| Iskudhufan oo dheer ah lagama maarmaan | 0.5/1.0/1.5mmAl | |
| Koobiyaha ugu sarreeya waa koobiyaha dhulka caaliya | ||
| 150 kV | ||
| Weedhaha meesha la goolo darayo | 3160 Lux, markii SIDlOOcm | |
| wakhtiga iyo ku | 30s ±5% | |
| Caynadda barashada barashada | 24V / 5W LED lamp | |
| Gudaha iyo sayniga | 24VAC, 0.2A | |
| Qaybta goobta ka yar | <20mmX20mm; SID 100cm | |
| Qalabka ballan la'aanta | Qaybta goobta ugu weyn | 43 X 43cm; SID 100cm |
| Miisaanka | 6.8kg±0.5kg | |
| Caydiyaha sawirka | 43X43cm (17" X 17") | |
| Cabbirrada | 46.0 X 46.0 X1.5cm | |
| Sized ka pixellada | 139μm | |
| Farsamanka X-ray | 40-150KV | |
| Loo yaabiyaha shafiska sare | Miisaanka | 3.2kg |
| Caydiyaha sawirka | 43X43cm (17"X 17") | |
| Loo yaabiyaha shafiska sare aan la xidhin | Cabbirrada | 46.0X46.0X1.5cm |
| Xoogga anode-ka loo bixiyey si sax ah (0. 1s), (50Hz) | Focus weyn: 50KW, focus yar: 20KW | |
| Xiriirka anooda | 2800 rpm | |
| 1) Dhexeereka hoos u leh: 120- -220V; 2) | ||
| Dhexeereka maamulka: 4060V; 3) | ||
| Qodobka subphase: 40 UF / 630V; 4) Waqtiga bilaawga: 1 ~ 1.2s | ||
| Tibixaha stator (50Hz) | ||
| Habka hoolinta jirka | Halkaas wax ku dhaadhiska ama halkaas ku dhaadhiska habdhaafka | |
| Kooban celcelintu ee tibixaha marka loo isticmaalayo si sax ah | 16 〜70°C | |
| Kooban celcelinta teedaha teedaha la socda si joogto ah | Lama yar: 200W (16 kHU / min); haa | |
| Mafan: 380W (32 kHU / min) | ||
| Filtration dheer | 1.5 mm Al (wax weyn) | |
| Iskudhufan oo dheer ah lagama maarmaan | 0.5/1.0/1.5mmAl | |
| Koobiyaha ugu sarreeya waa koobiyaha dhulka caaliya | ||
| 150 kV | ||
| Weedhaha meesha la goolo darayo | 3160 Lux, markii SIDlOOcm | |
| wakhtiga iyo ku | 30s ±5% | |
| Caynadda barashada barashada | 24V / 5W LED lamp | |
| Gudaha iyo sayniga | 24VAC, 0.2A | |
| Qaybta goobta ka yar | <20mmX20mm; SID 100cm | |
| Qalabka ballan la'aanta | Qaybta goobta ugu weyn | 43 X 43cm; SID 100cm |
| Miisaanka | 6.8kg±0.5kg | |
| Caydiyaha sawirka | 43X43cm (17" X 17") | |
| Cabbirrada | 46.0 X 46.0 X1.5cm | |
| Sized ka pixellada | 139μm | |
| Farsamanka X-ray | 40-150KV | |
| Loo yaabiyaha shafiska sare | Miisaanka | 3.2kg |
| Caydiyaha sawirka | 43X43cm (17"X 17") | |
| Loo yaabiyaha shafiska sare aan la xidhin | Cabbirrada | 46.0X46.0X1.5cm |
| Sized ka pixellada | 139μm | |
| Farsamanka X-ray | 40-150KV | |
| Miisaanka | 3.7kg | |
| Xidhka raatio | 0.417361111 | |
| Cufnaanta | 80L/cm | |
| Qaybta Antiscatter | Dhererka guud | 100cm/130cm |
| CPU | Intel Core i3 iyo sii u sare | |
| Hoodna qaybta hard disk | N500GB | |
| Meesha shaqada ka saamaysa sawir | Aan ugu weyn ah farsaminta skreenka | >1920*1080 |
| Aan ugu wanaagsan tahay briljansiga | N250 (cd/m2) | |
| Lacagta siinista elektarinka ugu weyn | 50kW(500mA, 100kV) | |
| Qof Koonfiyada | 50kW(500mA, 100kV 0. 1s) | |
| Kulaylka ugu badan | 50kW(500mA, l00kV.0. Is) (630mA, 79kV, 0. Is) | |
| isku-dhufashada tibixda | (320mA, 150kV, 0. Is) | |
| Kala-kamidka guud ee X-ray | 4. 0mm Al (la mid ah) | |
| Xunjiyadda bulsho | 30% 〜75% | |
| Waxgaha shaqada | Cuneysiga gacanta | 700hPa—1060hPa |
| Temperatur Maamulka | 5°C 〜40°C | |
| Xunjiyadda bulsho | 10% 〜95% | |
| Xaaladaha dhisidka iyo xadgudubka | Cuneysiga gacanta | 700hPa—1060hPa |
| Temperatur Maamulka | -10°C 〜50°C |
Sare ee shaqsiyada
Dhibaatooyinka soo galay
1. Maxa ah oo ku sameeyo degmada? Waxaan ugu yaraan markii degmadaadu ayaa dheer ah oo ka toosan la mid ahaan koonfurta, sababtoo waxaa jiray inaad soo baxaysatay fidowada si shisheeyo haddii aad ugaarato mid ka mid ah sidoo kale. Markaasaa waxaan ka darsameen qaariga ah ee deegaanka ah iyo degmada adeegsiga ah. Waxaan jiraan nidaamka adeegsiga ah ee ku jira roob badan ee dhammaantood, maxaa yeelay in aan ugu yaraan ee Afrika, Carabiya, Uroopa, Asiya iyo Dhulka Ciise ee ku jira barakadal. 2. Ma xusuus haysta intuu degmada ayaa dheer ah ama ka dib markaasuu ku jiraan supplier kale, oo markaasuu ku jiraan picture ama numberka modelka, waxaa lagu sameeyo yeeshee? Markii Xina ayaa hal gudaha ah ee ka hadlay, waxaa lagu talagalay macluumaadka badan ee lacagga ah ee ah reerkood, oo wacanka copy ayaa fogaanta ku cadaystay macaamiisha waxbarashada. Halkii uu lacagga ah ayaa degmada ugu yar ee caawimaadka ah oo ka mid ah controlka lacagga. 3. Maxaa tirada ka ah ee sameynka? Kuna fiiri kartaa waxaan idinku adeegnayaa in maalmeedkaan waa la sameeyo kana hore oo ku jiray degmada gudaha, maxkamada sameynka ayaa mid 15 sano ku noolaa markii deegaanka lagu siinayo. Haddii ay deegaankiisa ku yaal oo kale ama deegaankiis ugu yar, fadlan xiriirayaan haddii aan maalmood qaad ah oo ka mid ah stock, si sameynka lagu heli karaa kuwa barashada. 4. Maxay dhammaystiran la mid ah? Waxaan ku sameeyey madaxda sharciga ah ee sanad ah isku mid ah markii maalmooyinka lagu siinayo, kana hore oo ku jiray albaabka dhexdooda, waxaan adeegnayaa qaar bixinta ah oo lacag badan ah si aqoonsasho, kana hore oo ku jiray maslaalka dadweynaha, waxaan adeegnayaa sameeyntii maalmo oo lacag ah. 5. Maxay sharciyo? T⁄T, Kaarka Deegaanka, L⁄C, Western Union, PayPal, MoneyGram.
